With increasing manufacturing and machine quality, the quality of technical products' surface finishes is becoming ever more important.

This makes it all the more crucial to offer metrological solutions with instrument designs that provide quick and simple yet standards-compliant measuring options.

In some cases measurements are transferred from the inspection room to production to save time and money. Components may be

too large or heavy to be transported, leaving no alternative but to carry out measurements directly on the component or machine.

Error-free operation thanks to an integrated roughness standard.

Automatic cutoff selection (patented) so that even non-specialists are ensured correct measuring results.

25 parameters Offer the same range of functions as a laboratory instrument.

• Measuring range: 350 µm/180 µm/90 µm (changes automatically)
• Pick-up: Inductive skidded pick-up, 2 μm (80 μin) stylus tip, measuring force approx. 0.7 mN
• Unit of measurement:  Metric, inch
• standards: DIN/ISO/JIS/ASME
• Traversing length Lt* 1.75 mm, 5.6 mm, 17.5 mm; automatic (0.069 in, 0.22 in, 0.69 in)
• Traversing length (acc. to MOTIF): 1 mm, 2 mm, 4 mm, 8 mm, 12 mm, 16 mm (0.040 in, 0.080 in, 0.160 in, 0.320 in, 0.480 in, 0.640 in) 
• Cutoff lc*: 0.25 mm, 0.8 mm, 2.5 mm; automatic (0.010 in, 0.030 in, 0.100 in)
• Short cutoff*: Selectable
• Zahl der Einzelmessstrecken von 1 bis 5 wählbar
• Filter* Phase-correct profile filter (Gaussian filter) acc. to DIN EN ISO 11562, special filter acc. to DIN EN ISO 13565-1, ls filter acc. to DIN EN ISO 3274 (can be disabled)
• Parameters 25 (with tolerance limits): Ra, Rq, Rz equiv. to Ry (JIS), Rz (JIS), Rmax, Rp, Rp (ASME), Rpm (ASME), Rpk, Rk, Rsk, Rvk, Mr1, Mr2, A1, A2, Vo, Rt, R3z, RPc, Rmr equiv. to tp (JIS, ASME), RSm, R, Ar, Rx
• Languages: 14 including 3 Asian languages
• Memory capacity: Max. 15 profiles, max. 20,000 results
• Calibration function: Dynamic
• Other functions: Blocking of settings (code-protected), date/time

*acc. to ISO/JIS

• On-site surface roughness measurement
• Messen im Produktionsprozess
• Universal use on processing machinery
• For incoming goods inspections

• The MarSurf PS1-set contains
• MarSurf PS1 base unit
• Drive unit
• 1 standard pick-up conforming to standards
• Built-in battery
• Roughness standard integrated into casing
• Height adjustment accessory
• Pick-up protection
• Charger / mains adapter
• Operating instructions
• Carrying case with shoulder strap and belt loop
• USB cable
• Mahr calibration certificate